Outdoor Ethernet Switch


This is a preliminary specification of Ethernet switch for outdoor “Ethernet over Coax” solution. By using the unique “Ethernet over Coax” (EOC) technique, this switch can provide transmission distance much longer than original Ethernet limitation. Through coax cable, AC or DC power can also accompany with Ethernet signal. To apply in the outdoor environment, the enclosure has a compact, water-proof, dust-tight and surge protection designs. This outdoor Ethernet switch with advanced feature is very suitable to outdoor Ethernet networks.


  • Waterproof, dust-tight, anti-vibration connection and surge protection
  • Long transmission distance (>=300m)
  • Remote or local AC/DC powering
  • Operating temperature -40 to +85 degree C
  • VLAN, QOS, SNMP and web management
  • Aerial, pedestal or wall mounting available


outdoor ethernet switch outside look



Connector F female connector
Cable Coaxial cable
Port number 7 ports for data 10/100Mpbs Tx/Rx
2 ports for power & data 10/100Mpbs
1 port for local powering
Standard IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Speed 10/100Mbps for full duplexer
Transmission distance ~300m 5c or RG-60 coaxial cable
Remote powering YES
Forward /Backward powering Selectable
Local powering Available
Powering & Data Cascading ability YES
Power consumption 7.5W
Voltage 36~96 V for DC/AC
Maximal passing current 1 A
Interface Web browser / SNMP
QOS Policy based 4-level queues per port
Rate control YES
Security YES
Enclosure material Aluminum alloy
Mounting Aerial, pedestal or wall mounting available
Dimension 228.6 mm (H) x 71.2 mm(W) x 100.0 mm (D)
(connector not including)
Operating temperature -40 to +85 degree C
7 data ports with ethernet over coaxial cable  

Copyright © 2005-2008  Cable-Vision Electronics Co., Ltd. All rights reserved.

No part of this web page shall be reproduced without permission.